Material guide Indoor clarity

By David Deng · R&D manager, Sanait · Updated November 2026

There is no honest single answer in years. Clear acrylic stays clear indoors for a long time when it is virgin sheet, away from sun and strong UV, and it is not abraded by cleaning. It clouds or yellows sooner when “indoor” actually means a shop window, or when the grade was never specified. A number without grade, light, and method is not a fact.

The short answer

Working answer. In a true indoor setting — virgin PMMA, no direct sun, no UV-rich window, normal handling — clear acrylic is expected to stay clear for the service life of a typical display. That is a direction, not a warranty. The moment the face sees window light, or staff wipe it with the wrong cloth, the clock is a different problem. Ask for a grade and a test if you need a number.

Why there is no year-count

Clarity over time is the product of grade, ultraviolet dose, heat, and surface damage. ISO 7823 defines cast and extruded PMMA sheet. It does not set how many years a face stays colorless. A xenon-arc method such as ISO 4892-2 can compare grades in a lab. It still needs the conditions, the grade name, and a reading of color or haze before anyone turns it into “lasts N years indoors.”

Brochure years fail this test. They rarely name the sheet, the light, or the failure criterion — a just-visible tint, a measured yellowing index, a haze percent. Without those, two honest suppliers can both be “right” and still describe different parts.

What “indoors” has to mean

Indoor is not one light level
Site For clarity, treat as What to specify
Back of store, no sun True indoor Virgin PMMA, cast or extruded as the edge requires
Shop window, even if dry Outdoor light UV or outdoor grade; do not call it indoor
Near a skylight or glass door Partial outdoor light Say so; generic sheet is the risk
Strong UV retail lighting Not “no UV” Name the light if the face must not shift

A part that never gets wet can still yellow. Water is not the mechanism. Ultraviolet is.

Why an indoor face stops looking clear

  • Yellow tint. UV on an unspecified grade. Uncommon in a true back-of-store site. Common if someone called a window “indoor.”
  • Fine haze or swirl marks. Dry cloth on dust, or grit. This is abrasion. A UV grade does not prevent it.
  • Crazing. Fine cracks, often from a solvent cleaner or alcohol on a stressed face. A different defect from yellowing.
  • Joint blush. White at a solvent seam. A fabrication issue, not aging.

Most indoor “it isn’t clear anymore” returns are the second or third item. Reordering a UV grade will not fix a cleaning method. Teaching the wipe will not fix a window face in generic sheet.

What to expect by site

True indoor display

Virgin cast on show faces is the usual sheet for polish and joints. Clarity is not the risk. Scratches from handling are. Do not pay for an outdoor grade you will not use.

Window line

Not this article’s case. Specify a UV or outdoor grade. A year-count still needs the grade and the test.

High-touch counter piece

Clarity loss will be abrasion. Edge polish and a cleaning note matter more than a weathering claim.

A contract that demands a life

Put the grade name and the test on the order. A buying guide cannot supply the number.

Typical indoor pieces: boxes, trays, and display stands that do not sit in a window.

What to write on the RFQ

  1. True indoor, or window, or near glazing — pick one.
  2. Virgin PMMA, and cast or extruded on each member.
  3. That no service-life number is required, or the test and grade if one is.
  4. How the face will be cleaned, if staff wipe it.

Sanait will ask which of those sites a “clear indoor” brief means, because the sheet changes. Intake is on the FAQ. Scope is on the about page.

FAQ

How long does clear acrylic stay clear indoors?

No single year-count is honest. Virgin PMMA in true indoor light, not abraded, is expected to stay clear for a normal display life. Window light and bad wipes are different problems.

Will indoor acrylic yellow?

Not as a rule, if the site is truly out of sun and the grade is ordinary virgin sheet. A shop window is not that site.

Does cast stay clearer longer than extruded?

Route does not set a clarity life. Cast is specified for the polished edge and the joint. Exposure and grade set color shift.

Why did my indoor piece go cloudy?

Usually abrasion or crazing from cleaning, not UV. Check the cloth and the cleaner before you change the sheet.

Can I put a 10-year clear warranty on the drawing?

Only if a named grade and a named test support it, and the site is defined. A general acrylic note cannot.

Is thicker sheet clearer for longer?

No. Thickness does not block UV and does not stop a wipe from hazing the face.

About the author

David Deng

R&D manager at Sanait. 10+ years in acrylic fabrication; 2,000+ custom acrylic projects shipped across 20+ countries.

Sanait Co., Ltd. builds custom acrylic displays in Dongguan. This note is general. It does not state a service life in years. Plant terms are on the FAQ. Background is on the about page.

Sources

The standards identify the sheet and a laboratory weathering method. They do not convert either into an indoor year-count.

  1. ISO 7823-1:2003, Plastics — Poly(methyl methacrylate) sheets — Part 1: Cast sheets. iso.org
  2. ISO 7823-2:2003, Plastics — Poly(methyl methacrylate) sheets — Part 2: Extruded sheets. iso.org
  3. ISO 4892-2:2013, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps. iso.org
  4. “Poly(methyl methacrylate).” Wikipedia. en.wikipedia.org